ยินดีต้อนรับสู่ ฟอร์เอฟเวอร์ แอนด์ อะเดย์ เทคโนโลยี 

  • จ-ศ: 8.00am to 5.00pm
Search

ออฟเซ็ต (offset)

Offset

ออฟเซ็ต

เครื่องจักรที่มีระบบขับเคลื่อนแบบออฟเซ็ต มักถูกมองว่าไม่ตอบสนองต่อข้อผิดพลาดเชิงมุมระหว่างการขับและเพลาขับ อย่างไรก็ตาม พวกเขาจะไม่สามารถจัดการกับการเยื้องศูนย์เชิงมุมระหว่างก้านเพลาได้อย่างดีพอ ดังนั้นชุดอุปกรณ์ของเราที่ชื่อ Offset Fixtures จะสามารถช่วยให้วิธีการจัดตำแหน่งเพลาแบบทั่วไปที่ไม่สามารถทำได้ ให้ได้ระดับความแม่นยำของตำแหน่งเพลาตามที่ต้องการ

ทำไมต้องจัดแนวเพลาคาร์แดน?

เพลาคาร์แดนที่มีมุมไม่ตรงแนวจะทำให้เพลาขับเคลื่อนหมุนไม่สม่ำเสมอระหว่างการทำงาน ซึ่งส่งผลให้มีการสั่นสะเทือนเพิ่มขึ้น กล่าวอีกนัยหนึ่ง การจัดแนวเพลาคาร์แดนเหมือนกับเพลาทั่วไปมีความสำคัญพอๆ กัน ทำไมถึงเป็นอย่างนั้น?

  • ส่วนสำคัญในไดรฟ์สำหรับเครื่องจักร ซึ่งการแตกหักของแนวเพลาคาร์แดนทำให้เกิดการหยุดทำงาน
  • แนวเพลาคาร์แดนที่เรียงตัวไม่ดีจำทำให้เกิดข้อจำกัดในด้านกำลังการผลิตและคุณภาพของผลิตภัณฑ์
  • หมายถึงค่าใช้จ่ายจำนวนมากเมื่อจำเป็นต้องซ่อมแซมหรือเกิดความเสียหายขึ้น
  • แนวเพลาคาร์แดนที่จัดแนวไม่ดี จะลดอายุการใช้งานของกระปุกเกียร์และมอเตอร์
  • การชำรุดของแนวเพลาคาร์แดนในสภาพการเดินเครื่องจักรอาจเป็นอันตรายอย่างยิ่ง

สามารถใช้ NXA กับชุดอุปกรณ์ยึดออฟเซ็ต เพื่อจัดตำแหน่งเพลาเครื่องจักรที่ติดตั้งแบบออฟเซ็ตได้อย่างแม่นยำ และรวดเร็วเหมือนกับการจัดตำแหน่งเพลาอื่นๆ ชุดอุปกรณ์ Offset Fixture ประกอบด้วยทั้งซอฟต์แวร์และอุปกรณ์ติดตั้ง

Offset

ตัวชี้เลเซอร์เพื่อการติดตั้งที่รวดเร็ว

ฟิกซ์เจอร์ออฟเซ็ตติดตั้งตัวชี้เลเซอร์ ซึ่งหมายความว่าไม่จำเป็นต้องใช้ระบบการจัดตำแหน่งเพื่อติดตั้งฟิกซ์เจอร์ ต้องปรับอุปกรณ์ติดตั้งจนกว่าเลเซอร์ทั้งสองจะกระทบกับศูนย์กลางของเป้าหมายฝั่งตรงข้าม ด้วยคุณสมบัตินี้ การติดตั้งจึงง่ายและสามารถทำได้อย่างรวดเร็ว

Offset

ฟิกซ์เจอร์ออฟเซ็ตมาพร้อมกับ รูปแบบการติดตั้งที่ได้รับการออกแบบ ให้คุณสามารถปรับใช้ได้ง่ายกับคัปปลิ้ง ด้วยการยึดสลักตัวเองเมื่อติดตั้งแขนบนหน้าแปลน

Offset

ฟิกซ์เจอร์เลเซอร์ออฟเซ็ทสามารถปรับได้ในระนาบ ขนานกับหน้าแปลนของเครื่องจักร และสามารถตั้งค่าที่ตำแหน่งใดก็ได้เพื่อให้ได้ตำแหน่งที่เหมาะสม

Offset

เลเซอร์ที่มีมาในแต่ละฝั่งนั้นได้ถูกออกแบบให้ใช้ในการปรับก่อนติดตั้งเซนเซอร์ ดังนั้นลำแสงเลเซอร์จะแสดงถึงแกนของการหมุนของยูนิต ซึ่งติดตั้งอยู่บนแท่นนั้นเอง

Offset

วิธีการหมุนแบบนาฬิกาใช้เพื่อให้ได้ผลลัพธ์ที่ครบถ้วนแม่นยำ ในวิธีการจัดตำแหน่งเครื่องจักรแบบนาฬิกาคือ การคำนวณค่าการเยื้องแนวแกนเพลาโดยเอาค่าการวัดจาก 3 จุดหมุนที่มีมุมองศาการกวาดรวม 180 องศา

ส่วนหนึ่งของลูกค้าที่ไว้ใจ
Read Our Latest News

News & Articles

การตั้ง Alignment คืออะไร Pre-Alignment หรือ การตรวจสอบความพร้อมเครื่องจักรก่อนการตั้งศูนย์เพลา ที่มีประโยชน์อย่างยิ่ง ในการช่วยให้ท่านป้องกันความผิดพลาด
FOREVER AND A DAY TECHNOLOGY

Product

Offset

Offset

Machines with offset drives are often thought of as insensitive to angular errors between driving and driven shaft. However, they cannot absorb angular misalignment between the shafts, hence our kit the Offset Fixtures. Conventional alignment methods do not provide the required level of accuracy.

Why align cardan shafts?

Cardan shafts with angular misalignment typically cause the driven shaft to rotate unevenly during operation, which results in increased vibration. In other words, it is just as important to align cardan shafts as regular shafts. Why is that?

  • A vital part in drives for machines, where breakage of cardan shafts causes downtime

  • Badly aligned cardan shafts set limitation in production capacity and product quality

  • Stands for a considerable cost when repairs are needed or a breakdown occurs

  • Badly aligned cardan shafts reduce lifetime in gearboxes and motors

  • The breakdown of a cardan shaft in running condition could be extremely dangerous.

Use the NXA with the Offset Fixture kit and you can precision align any offset mounted machine as fast as you align any other shafts. The Offset Fixture kit consists of both software and fixtures.

Offset

Laser pointer for fast mounting

The Offset fixture is equipped with a laser pointer, which means that the alignment system is not needed in order to mount the fixtures. The fixtures only have to be adjusted until both the lasers are hitting the center of the opposing target. Thanks to this feature, the mounting can be performed fast.

Offset

The Offset fixture comes with a number of methods of attachment. The system is designed so you can, in most cases, utilize the coupling bolts themselves when mounting the arm on the flange.

Offset

The Offset laser fixture is adjustable in a plane parallel to the flange face of the stationary machine and can be set at any position to eliminate the offset from the driven unit.

Offset

The built-in lasers in each turret are pre-adjusted so the laser beam represents the axis of rotation for the unit, it is mounted on.

Offset

The Clock method is used to get the result. In the Clock method, machinery positions are calculated by taking three points with 180 degrees of rotation.

Part of our trusted customers
Read Our Latest News

News & Articles

การตั้ง Alignment คืออะไร Pre-Alignment หรือ การตรวจสอบความพร้อมเครื่องจักรก่อนการตั้งศูนย์เพลา ที่มีประโยชน์อย่างยิ่ง ในการช่วยให้ท่านป้องกันความผิดพลาด
FOREVER AND A DAY TECHNOLOGY

Product

X