Wire Terminal Testers
WT3-201M
Motorized Wire Pull Tester, 200 lb / 100 kg Capacity
For both destructive and non-destructive testing on crimped terminals
Made in the USA
WT3-201
Manual Wire Pull Tester
USB, RS-232, Analog outputs
200 lb, 100 kg , 1000 N Capacity
Made in the USA
WTT-ESM
Motorized Wire Terminal Tester with Programmable Force Control
Range: 0-200 lbs / 0-100 Kg / 0-1000N
Conforms to all international test standards: MIL, UL, SAE, DIN, IEC, BS and EN
WTT-ESMHD
The WTT-ESMHD system is a high capacity motorized pull tester designed for checking wire terminal crimp strength per UL and MIL specifications.
Available in 750 or 1500 lb capacity, the WTT-ESMHD includes a slotted wire terminal fixture accommodating wires up 0000 AWG (4/0) (.46" / 11.8mm diameter).
ACT-220
Automatic Wire Crimp Tester with EL electro-luminescent display, measures up to 220 lbf
±0.5% Accuracy
1,500 Data Memory
WTT
Manual Wire Terminal Pull Tester
Capacity 220 lbs / 100 kg / 1000 N
Suitable for wire diameters up to 0.24 inches / 6mm, AWG 30 to AWG 4
MR06-200
Hand-Operated Wire Pull Tester
200 lbF / 1000 N capacity
Accommodates a wide range of wire diameters, up to 0.25 in. (6.4 mm) / 20 - 3 AWG.
WTT-1000
Hand-Operated Wire Pull Tester
200 lbF / 1000 N capacity
Accommodates a wide range of wire diameters, up to 0.25 in. (6.4 mm) / 20 - 3 AWG.
WTT-HD
Heavy-Duty
Wire Terminal Tester Pull Tester
Range: 0-220 lbs / 0-100 Kg / 0-1000N
Measures in "Continuous" or "Peak" mode
WTTM
Motorized Wire Terminal Pull Tester
2 Models Available with ranges up to 220LB / 100KG / 1000N
Conforms to all international test standards: MIL, UL, SAE, DIN, IEC, BS and EN
WTTM
Wire Terminal Tester
Range: 0-110 lbs / 0-50 Kg / 0-500N
Measures in "Continuous" or "Peak" mode
WTTM-GEN1
Wire Terminal Tester
Range: 0-110 lbs / 0-50 Kg / 0-500N
Measures in "Continuous" or "Peak" mode
WT3-200
Wire Terminal Tester
USB, RS-232, Mitutoyo, analog, set point outputs
1,000-point data memory and statistics
Auto output / data storage / zero upon sample break
WTT-BX
Wire Terminal Tester
Pull Tester
Range: 0-110 lbs / 0-50 Kg / 0-500N
Measures Peak Pull Force required to remove wire terminal
WTT-110
Wire Terminal Tester
Pull Tester
Range: 0-110 lbs / 0-50 Kg / 0-500N
Measures in "Continuous" or "Peak" mode
AC1049
Calibration Kit for WT3-200
Set of attachments to calibrate WT3-200 wire terminal pull tester
Weights not included
