THICKNESS GAUGE METER : MiniTest 3100
Measuring Range – 0.01-78.0 mils (0.1–1980 µm)
The CHECK•LINE DCF-2000 Series Coating Thickness Gauge accurately measures the thickness of paint, plating, galvanize and other coatings on Ferrous metal surfaces. The DCF-2000 incorporates the latest technology to provide consistent, highly accurate results in a wide variety of applications.
Features
- Long-lasting, driftless calibration provides reliable, repeatable results over the entire measuring range.
- 0.01 mil (0.1µm) resolution
- Keypad-selectable English or metric units
- Lightweight and battery-powered
- All models are supplied with the gauge, probe and cable assembly, bare test plate(s), two (2) plastic calibration shims & instruction manual all in a foam-fitted, hard-plastic carrying case.
Specifications
Measuring Range | 0.01-78.0 mils (0.1-1980 µm) |
Accuracy | ±1% of reading plus 0.03 mils (0.8 µm) |
Resolution | 0.01 mils (0-7 mils), 0.1µm (0-99.9 µm) 0.1 mils (7-78 mils), 1µm (100-1980 µm) |
Minimum Substrate Thickness | 15 mils (375 µm) |
Calibration Std’s | Bare metal test plate(s) plus two (2) precision commercial grade calibration shims (NIST traceable shims are available. Inquire) |
Battery Type | 9 Volt alkaline |
Battery Life | 6 months (approx.) normal use with auto shutoff after 90 seconds of non-use |
Dimensions | 5.7″ x 3.1″ x 1.5″ (145 x 79 x 38 mm) |
Weight | 12 oz. (340 g) |
Temperature Limits | Material 32 – 300 F (0 – 149 °C) Ambient – 32 – 120 F (0 – 50 °C) |
Part of our trusted customers
Read Our Latest News
News & Articles
- By Admin Faadtech
- Comments are off for this post.
That machinery comes in various types and is utilized for different purposes. They are predominantly categorized based on their usage patterns in the workplace. For instance, for simpler tasks, machinery such as pulleys, ropes, and
- By Admin Faadtech
- Comments are off for this post.
The importance of shaft alignment (Shaft Alignment) is an important step in the maintenance of rotating machinery. This involves precisely aligning the machine shafts so they are parallel and aligned.