THICKNESS GAUGE METER TL – CMX
The Check-Line TI-CMX accurately measures coating and wall thickness on a wide range of materials. Five selectable measuring modes enable the operator to precisely measure wall thickness, coating thickness and locate corrosion and pitting—without removing the coating.
Five user-selected operating modes are included:
- Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness.
- Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only.
- Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature.
- Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included)
- Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.013 to 2.540 mm). Range will vary slightly depending on the coating.
New Features in Version 2.0
- High speed scan 200Hz
- TDG (Time Dependent Gain)
- Improved linearity tables (in all measurement modes)
- 110dB gain range
- Setups can be backed up or restored using USB connection
- Screen update rate (25Hz)
- PRF (pulse repetition frequency 250Hz)
- Line power available using USB-C to PC or standard power adapter
Features
- Includes NIST-Traceable Calibration Certificate
- Auto probe recognition with Auto Zero or Manual Zero.
- Wide variety of dual-element probes can be used for nearly any application.
- Bar graph with user-set start end values providing highest resolution around the target thickness value.
- Differential Mode allows user to set a “target thickness value” and display will show the DIFFERENCE between actual and target thickness as a plus or minus value.
- TI-CMX-H for surface temps up to 300°F/150°C. Optional hi-temp probes for higher surface temperatures offered
- Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db).
- 64 custom setups can be stored and retrieved for convenient use and labeled for easy identification
- Display Hi/Lo Alarm Limits with audible and visual indicators.
- 2 Year Warranty for Gauge (90 days for probe)
- Metal housing provides strong protection against harsh environments.
- Measures Coatings up to 0.100″
- IP 65 Rated
- CE Certified
- Warranty: Gauge: 2 Years Probes: 90 Days
- Made in USA
Display mode
| Hi-Speed Scan Mode | B-Scan Mode |
 |  |
| โScan Mode measures 64 times per second, displaying the max and min reading measured during the scan interval. Sample rate is 200/sec when coating measurement is off. | The B-Scan displays a time based cross section view of test material of the contour of the blind, or underside of a pipe or tank application. the B-Scan view draws at a rate of seven seconds per screen from right to left. |
Specifications
| Range in Steel: | Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 – 9.999inches (0.63 to 254 millimeters) Echo-Echo Mode: Thru Paint & coatings measures from 0.100 – 4.000 inches (2.54 to 102 mm). Range will vary depending on the thickness |
| Range in Coating Only Mode | 0.0005″ – 0.1000″ / Resolution: 0.0001″ (0.013 – 2.540 mm / Resolution: 0.001 mm) |
| Max Coating | 0.100″ (2.54mm) |
| Resolution: | .001 inches (0.01mm) |
| Velocity Range: | .0492 to .3936 in./ms 1250 to 9999 meters/sec |
| Units: | Inch or mm |
| Measurement Modes: | – Pulse-Echo (corrosion mode) – Pulse-Echo Coating (Corrosion w/o coating) – Echo-Echo (thru-paint) – Temp Comp (auto adjust for material temp) – Coating Only (Ultrasonic Coating Gauge) |
| Transducer Types: | Dual Element (1 to 10 MHz). |
| Output | RS-232 for upload/download of setups |
| Memory capacity: | TI-CMX: None TI-CMXDL: over 200,000 measurements |
| Power Source: | Three 1.5V alkaline or 1.2V NiCad AA cells |
| Battery Life: | Typically operates for 150 hours on alkaline and 100 hours on NiCad |
| Auto Power off: | After 5 minutes of non-use |
| Display: | 1/8 in. VGA grayscale display 62 x 45.7mm |
| Keyboard: | Membrane switch with twelve tactile keys |
| Case: | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). |
| Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C) Special high temperature model TI-CMX-H is available for 300°F/150°C and optional probes are offered for higher surface temperatures |
| Weight, net: | 383 grams |
| Dimensions: | 63.5 W x 165 H x 31.5 D mm |
| Warranty: | 2 Year Warranty for Gauge (90 days for probe) |
| Certification: | CE Approved, Factory calibration traceable to national standards |
Part of our trusted customers
Read Our Latest News
News & Articles
That machinery comes in various types and is utilized for different purposes. They are predominantly categorized based on their usage patterns in the workplace. For instance, for simpler tasks, machinery such as pulleys, ropes, and
The importance of shaft alignment (Shaft Alignment) is an important step in the maintenance of rotating machinery. This involves precisely aligning the machine shafts so they are parallel and aligned.
